Reference: 1861-0561
Brand: Drag Specialties
O2 WELD-IN SENSOR BUNGS 12 mm x 1.25 FOR EXHAUSTS MOTORCYCLE
Used to install oxygen sensors in the exhaust systems
Banner
No supplier
Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Slow reading oxygen sensors can cause a drop in fuel economy of 10-15%, excessive exhaust emissions and poor drivability
Life expectancy of an average oxygen sensor in a properly tuned engine is typically 30,000-50,000 miles
Narrow band O² sensors available in 12.5", 16.25" and 22.25" overall lengths
Replacement Wide Band O² sensor for aftermarket ignition tuners also available; overall length is 30.25"
All sensors meet or exceed OE specifications
Made in the U.S.A.
LENGTH: 16.25" (41.25 CM)
MADE IN THE U.S.A.: Yes
PACKAGING: Each
SIZE: 18mm
SPECIFIC APPLICATION: Yes
STYLE: OEM Replacement
Fits:
2008 - 2011 Harley-Davidson Dyna Fat Bob (EFI) - FXDF
2007 - 2009 Harley-Davidson Dyna Low Rider (EFI) - FXDL
2006 Harley-Davidson Dyna Low Rider-Injected - FXDL-I
2006 - 2011 Harley-Davidson Dyna Street Bob (EFI) - FXDB
2007 - 2010 Harley-Davidson Dyna Super Glide (EFI) - FXD
2007 - 2011 Harley-Davidson Dyna Super Glide Custom (EFI) - FXDC
2006 Harley-Davidson Dyna Super Glide Custom Injected - FXDC I
2005 - 2006 Harley-Davidson Dyna Super Glide Injected - FXD I
2007 - 2008 Harley-Davidson Dyna Wide Glide (EFI) - FXDWG
2010 - 2011 Harley-Davidson Dyna Wide Glide (EFI) - FXDWG
2006 Harley-Davidson Dyna Wide Glide-Injected - FXDWG-I
Shipping time: 7 days
Reference: 1861-0561
Brand: Drag Specialties
Used to install oxygen sensors in the exhaust systems
Reference: MCS-904996
Brand: CV Performance
ForHarley-Davidson Blackline FXS,Softail Fat Boy FLSTF,Slim FLS,Deluxe FLSTN,Deuce FXSTD.Repl.OEM HD 32700005.
Reference: 1861-0885
Brand: Feuling
Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Reference: 18610562/MCS-980417/1
Brand: Drag Specialties
Lets you close the housing arranged for oxygen sensors (O2 sensors) on the outlets.
Reference: 10220039/309-355
Brand: Thundermax
Easy installation: replace the stock ECM, install the new lambda probes and new wiring, load the correct map for the bike and go
Reference: 1861-0784
Brand: Bassani Exhaust
These stainless steel adapters allow you to install the o2 sensor lambda probe with 12 mm thread on the original 18 mm housing. on the exhaust systems.
Reference: MCS-904997
Brand: CV Performance
For Harley-Davidson Blackline FXS,Softail Fat Boy FLSTF,Slim FLS,Deluxe FLSTN,Deuce FXSTD.Repl.OEM HD 32700006.
Reference: MCS-904998
Brand: Vance & Hines
For Harley-Davidson XL 1200T Superlow,1200X Forty-Eight,1200C Custom,1200CX Roadster,1200V Seventy-Two,883L Superlow, 883N Iron,1200NS Iron 1200. Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and...
Reference: 1861-0695
Brand: Drag Specialties
Used to install oxygen sensors in the exhaust system.45° angle
Reference: 18611363/MCS-904998
Brand: Feuling
Repl.OEM HD 32700005.Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Reference: 1861-0884
Brand: Feuling
Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Reference: 1861-0594
Brand: Drag Specialties
Reduces 18mm bungs to 12mm for sensors O2
Reference: 1861-1185
Brand: Drag Specialties
Used to install oxygen sensors in the exhaust systems.
Reference: 18611362/MCS-904997
Brand: Feuling
Repl.OEM HD 32700006.Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases
Reference: 1861-0464
Brand: Vance & Hines
To close the threaded seats for the oxygen sensors (O2 sensors) on the outlets.
Reference: MCS-904996
Brand: CV Performance
For Harley-Davidson Dyna FXDF Fat Bob,FXDL Low Rider,FXDB Street Bob,FXDWG Wide Glide,FXD Super Glide.Repl.OEM HD 32700005.
No customer questions for the moment.
This site uses cookies, including third parties, to offer services in line with your preferences and send you advertising. For more information and to read the extended information or to refuse consent to all or some of the cookies, click on the 'Cookie policy'. By closing this banner, scrolling through this page or by clicking any of its elements you consent to the use of cookies.
Cookie policy