Large 4" (10cm) diameter muffler delivers a deep, throaty tone that's smooth off idle and roars to life with a twist of the throttle. Specially designed baffle prevents backlash and increases torque for smooth power all the way up the RPM range
Power House High Performance Slip-On 4" Muffler for Softail Sport Glide
4" Slip-On Mufflers for 2018 up Softail Sport Glide Large 4" (10cm) diameter muffler delivers a deep, throaty tone that's smooth off idle and roars to life with a twist of the throttle Specially designed baffle prevents backlash and increases torque for smooth power all the way up the RPM range Aluminum end cap included 30" (76cm) length Accepts stock OE heat shield
The Sport Glide has a gasket between the header pipe and muffler that must be replaced. You can purchase the gasket (part number HD-65900040 see matching accessories)
For 2021-later EU Softail/Touring models, the O2 sensor eliminator plug is required (see accessories)
Tech Tip: Pre-2021 USA mufflers on a 2021-up EU Softail/Touring? 2021 and later US models only have 2 O2 sensors in the manifolds. 2021 and later EU models (Euro 5 system) have a total of 3 or 4 O2 sensors, also 1 or 2 downstream in the muffler(s) or cross-section balance pipe. Therefore 2021-2024 US exhaust systems will not fit 2021-2024 European models. The O2 Eliminator Plug (see accessories) allows the 3rd downstream muffler O2 sensor to be disabled, without triggering fault codes. This will allow the use of pre-2021 US or European exhaust mufflers that do not have a downstream O2 sensor connection.
* Compatibility:
2018 - 2024 Harley-Davidson Sport Glide - FLSB Milwaukee-Eight
For Harley-Davidson Softail Slim FLSL,Deluxe FLDE,Street Bob FXBB,Low Rider FXLR.PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
TBR is proud to offer Competition-S 2-1 full systems. Their classic stainless 2-1 cone system complete with either a carbon fiber end cap, or a welded Megaphone Gen II end cap. The stepped headers offer a substantial power increase, while the 2-1 system by design will increase torque significantly.
The NH series designation on this 4-inch muffler indicates it is part of the Neighbor Hater class of exhaust. That means it's a bit louder than our standard offerings. It produces that deep rumble you expect, but with a more emphatic level. It has the same sound as our original Neighbor Hater, but in a more sophisticated design.
TBR is proud to offer two Competition-S 2-1 full systems. Their classic stainless 2-1 cone system complete with either a carbon fiber end cap, or a welded Megaphone Gen II end cap. The stepped headers offer a substantial power increase, while the 2-1 system by design will increase torque significantly.Made in the U.S.A.
Steel exhaust system with a street legal aluminum end cap with an adjustable exhaust valve that allows you to tune the sound of your bike the way you like it, but still fall within what is legal.ECE/ABE Approved
Large 4" (10cm) diameter muffler delivers a deep, throaty tone that's smooth off idle and roars to life with a twist of the throttle.Specially designed baffle prevents backlash and increases torque for smooth power all the way up the RPM range
TBR is proud to offer two Comp-S 2-1 full systems. Their classic stainless 2-1 cone system complete with either a carbon fiber end cap, or a welded Megaphone Gen II end cap. The stepped headers offer a substantial power increase, while the 2-1 system by design will increase torque significantly.
Stepped headers merge into a true reverse-cone megaphone muffler.1 3/4" headpipe steps up to 17/8" into the collector to increase flow and improve performance
Large 4” (10 cm.) diameter muffler delivers deep, throaty tone that’s mellow at idle and roars to life with a twist of the throttle.Specially designed baffle prevents reversion and boosts torque for a smooth power deliver all the way through the RPM range
Stepped headers merge into a true reverse-cone megaphone muffler.1 3/4" headpipe steps up to 17/8" into the collector to increase flow and improve performance
This O2 sensor eliminator is ideal for running your bike without O2 sensors.This allows you to simulate a cold sensor condition so that the ECM runs "open loop"
$29.15
In Stock
Large 4" (10cm) diameter muffler delivers a deep, throaty tone that's smooth off idle and roars to life with a twist of the throttle. Specially designed baffle prevents backlash and increases torque for smooth power all the way up the RPM range
