HIGH PERFORMANCE OIL PUMP FEULING HP+® HARLEY DAVIDSON SOFTAIL 2018-2025

    Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
    Eliminate common pressure and scavenge issues associated with the factory oil pumps
    Precision-machined pressure relief valve and bore
    Every pump is bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
    Feuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
    When matched to a Feuling® cam plate, pumps reduce engine and oil temperatures, increase oil pressure volume, and scavenge volume on the return side to reduce build up of oil in the crankcase
    Increase oil flow in and out of the engine with corrected tolerances, oil passages and larger geroter gears
    High-flow 2.250" Chrome Moly gerotor gears
    42% more scavenge volume with matched passages, port sizing and holes to the engine case
    68% more oil volume to the crankshaft and connecting rod bearing
    Magnet to help protect gears and pressure relief valve
    More horsepower and torque to the rear wheel
    M-Eight Twin-Cooled™ motors have 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock
    M-Eight oil-cooled motors have 27% more pressure and scavenge gear volume over stock
    Billet 6061 aluminum with natural finish
    Increases oil pressure
    Increased kidney passage volume
    Eliminates blow by and wet sumping
    Cooler oil & engine temperatures
    Made in the USA
    Increased and optimized scavenge port holes and galleys requires being matched to a Feuling® High Flow cam plate PART #0932-0192.
    EU: Every pump is bench tested, the relief valve is seated and sealed to a minimum of 2,06 bar with full pop-off at 3,79 bar - 4,13 bar
    M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
    EU: High-flow 5,72 cm Chrome Moly gerotor gears

     For oil-cooled engines only

* Compatibility:

2022-2025    Harley-Davidson    Softail Low Rider ST FXLRST Milwaukee-Eight
2020-2025    Harley-Davidson    Softail Low Rider S FXLRS Milwaukee-Eight
2020-2025    Harley-Davidson    Softail Standard FXST Milwaukee-Eight
2019-2020    Harley-Davidson    FXDR 114 Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Fat Bob 114 FXFBS Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Fat Boy 114 FLFBS Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Heritage Classic 114 FLHCS Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Street Bob FXBB Milwaukee-Eight
2018-2022    Harley-Davidson    Softail Heritage Classic FLHC Milwaukee-Eight
2018-2024    Harley-Davidson    Softail Slim FLSL Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Sport Glide FLSB Milwaukee-Eight
2018-2025    Harley-Davidson    Softail Breakout 114 FXBRS Milwaukee-Eight
2018-2020    Harley-Davidson    Softail Deluxe FLDE Milwaukee-Eight
2018-2020    Harley-Davidson    Softail Low Rider FXLR Milwaukee-Eight
2018-2019    Harley-Davidson    Softail Breakout FXBR Milwaukee-Eight
2023-2025    Harley-Davidson    Softail Breakout FXBR Milwaukee-Eight
2018-2019    Harley-Davidson    Softail Fat Bob FXFB Milwaukee-Eight
2018-2019    Harley-Davidson    Softail Fat Boy FLFB Milwaukee-Eight