Great camshaft kit for Softail Dyna and Touring Provides high torque and power at low rpm Maximum from 1500-5000 rpm Made in the USA The installer must check the spool connection, valve-to-valve clearance, and valve-to-piston clearance. Not recommended for engines with compression ratios higher than 10.1:1 (EU 10.1:1). For use with models equipped with a hydraulic tensioner chain drive system and requiring high lift valve springs. ----------------------------------- Intake lift 0.583" Intake lift at TDC 0.113" Exhaust lift 0.583" Exhaust lift at TDC 0.206" 5° intake opening Intake centering 96.5° Exhaust centering 107° 18° intake closure Suction duration 203° Discharge duration 262° Rectification Series 583 Exhaust open 58° Exhaust closed 24° Chain type Kit Unit ------------------------------------------ Intake lift 0.583" Intake lift at TDC 0.113" Exhaust lift 0.583" Exhaust lift at TDC 0.206" 5° intake opening Intake centering 96.5° Exhaust centering 107° 18° intake closure Suction duration 203° Discharge duration 262° Grinding 583 Series Exhaust open 58° Exhaust closed 24° Chain type Kit Unit
Designed for 96-106 CID engines with 9:1-9:9 compression, this is a bolt-on cam set for stock or slightly modified touring bikes.More power throughout the RPM range, with improved low to mid-range torque, strongest from 1,000-4,000 RPM.
Start any engine regardless of displacement or compression ratio with a factory starter.Save starter and battery; tested for 10,000 starts without the battery going down.Chain driven cams
For Harley-Davidson Milwaukee-Eight Electra Glide Ultra Classic FLHTCUI,Ultra Limited FLHTK,Road Glide FLTR,Road King FLHR,Street Glide FLHX.For chain distribution.Kit includes all required bearings, o-rings, and hardware.Designed for 107"/114" motors, compatible with all stock valve train components.
For Harley-Davidson Low Rider FXDL,Super Glide FXD,Wide Glide FXDWG,Road King FLHR,Electra Glide FLHT,Road Glide FLTR,Street Glide FLHX,Softail Night Train FXSTB,Softail Fat Boy FLSTF.Bolt-on cam for 103" Twin Cam engines.Broad torque curve improves power over stock throughout the entire rpm range
For Harley-Davidson Street Bob FXDB,Low Rider FXDL,Super Glide FXD,Breakout FXSB,Road King FLHR,Electra Glide FLHT,Road Glide FLTR,Street Glide FLHX,Softail Slim FLS,Softail Fat Boy FLSTF.Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring Harley Davidson.
They deliver strong low-end torque and power you can really feel.Maximum performance from 1500 to 5000 rpm when used on Dyna and Softail models.Starts any engine regardless of displacement or compression ratio with a stock starter.All gear-driven cams include a set of 4 gears and an installation kit
They deliver strong low-end torque and power you can really feel.Maximum performance from 1500 to 5000 rpm when used on Dyna and Softail models.Starts any engine regardless of displacement or compression ratio with a stock starter.All chain-driven cams include an installation kit
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.For Chain Drive.Compatible with original equipment valve springs, both first-generation (round port) and second-generation (oval port).
The 585C timing chain cams are designed for 88" to 107" engines with compression ratios of 10 to 10.5:1 and 100" and 107" engines with ratios of 9.7:1 to 10.5:1
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.Bolt in compatible with all stock valve train components.Gear drive cams provide improved valve timing accuracy.Ideal power cam for 114" and larger engines
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.For gear distribution.Kit includes all required bearings, o-rings, and hardware.Designed for 107"/114" motors, compatible with all stock valve train components.
For Harley-Davidson Milwaukee-Eight Electra Glide Ultra Classic FLHTCUI,Ultra Limited FLHTK,Road Glide FLTR,Road King FLHR,Street Glide FLHX.For chain distribution.Kit includes all required bearings, o-rings, and hardware.Bolt-in compatible with all stock valve train components.
Designed for 96-106 CID engines with 9:1-9:9 compression, this is a bolt-on cam set for stock or slightly modified touring bikes.More power throughout the RPM range, with improved low to mid-range torque, strongest from 1,000-4,000 RPM.
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.For chain distribution.Kit includes all required bearings, o-rings, and hardware.Bolt-in compatible with all stock valve train components.
