The 585C timing chain cams are designed for 88" to 107" engines with compression ratios of 10 to 10.5:1 and 100" and 107" engines with ratios of 9.7:1 to 10.5:1
The 585C timing chain cams are designed for 88" to 107" engines with compression ratios of 10 to 10.5:1 and 100" and 107" engines with ratios of 9.7:1 to 10.5:1 Maximum power from 3,500-6,000 rpm for 88" to 103" engines and 2,500-5,000 rpm for larger engines Made in the USA The installer must check the spool connection, valve-to-valve clearance, and valve-to-piston clearance. -------------------------------------------------- ------ Intake lift 0.585" Intake lift at TDC 0.186" Exhaust lift 0.585" Exhaust lift at TDC 0.179" 20° intake opening Applications Exhaust, Suction Intake centering 102.5° Exhaust centering 110° 45° suction closure Suction duration 245° 260° drain duration Grinding 585 Series Exhaust open 60° Exhaust closed 20° Chain type Kit Unit
For Harley-Davidson Milwaukee-Eight Electra Glide Ultra Classic FLHTCUI,Ultra Limited FLHTK,Road Glide FLTR,Road King FLHR,Street Glide FLHX.For Chain Drive.Compatible with original equipment valve springs, both first-generation (round port) and second-generation (oval port).
The N3 cams kits are designed specifically for mounting without modification on all Sportster models 883 and 1200 since 2005 with springs, hydraulic tappets and seeded. They provide an increase in power of all the provision of laps
For 1100 and 1200 prepared or 883 stroker, with springs and original tappets. Same intake cam N4 but more exhaust duration. great power to the average damage. power increase from 2000 to 6000 RPM.
For Harley-Davidson Milwaukee-Eight Electra Glide Ultra Classic FLHTCUI,Ultra Limited FLHTK,Road Glide FLTR,Road King FLHR,Street Glide FLHX.For chain distribution.Kit includes all required bearings, o-rings, and hardware.Designed for 107"/114" motors, compatible with all stock valve train components.
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.For Chain Drive.Compatible with original equipment valve springs, both first-generation (round port) and second-generation (oval port).
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring Harley Davidson.Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
Designed for 96-106 CID engines with 9:1-9:9 compression, this is a bolt-on cam set for stock or slightly modified touring bikes.More power throughout the RPM range, with improved low to mid-range torque, strongest from 1,000-4,000 RPM.
Cams installed without modification on original engine 883, 1100 and 1200. More duration and lift it means extra power at all engine speeds. Recommended with tappets and stock springs. power increase from 2000 to 6000 RPM.
They deliver strong low-end torque and power you can really feel.Maximum performance from 1500 to 5000 rpm when used on Dyna and Softail models.Starts any engine regardless of displacement or compression ratio with a stock starter.All chain-driven cams include an installation kit
For Harley-Davidson XL 1200T Superlow,XL 1200C Custom,XL 1200N Nightster,XL 1200R Roadster,XLX 1200 Forty-Eight,XL 883,XL 883C Custom,XL 883L Low,XL 883N Iron,XL 883R.Street or drag racing, engine 883, 1100 or 1200 original or prepared. Require a minimum a little higher but are suitable to tappets and stock springs. power increase from 2000 to 6000 RPM.
For Harley-Davidson Street Bob FXDB,Low Rider FXDL,Super Glide FXD,Breakout FXSB,Road King FLHR,Electra Glide FLHT,Road Glide FLTR,Street Glide FLHX,Softail Slim FLS,Softail Fat Boy FLSTF.Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring Harley Davidson.
For Harley-Davidson Milwaukee-Eight FXBR Breakout,FXFB Fat Bob,FXBB Street Bob,FLSB Sport Glide,FLFB Fat Boy,FLHC Heritage Classic,FXLR Low Rider,FLSL Softail Slim.For chain distribution.Kit includes all required bearings, o-rings, and hardware.Bolt-in compatible with all stock valve train components.
The 585C timing chain cams are designed for 88" to 107" engines with compression ratios of 10 to 10.5:1 and 100" and 107" engines with ratios of 9.7:1 to 10.5:1
